Asians generally have high zygomatic bones and low facial folding degree. Volassom’s microcurrent probe adopts 15-degree tilt design that precisely fits the natural curvature from apple cheeks to jawline. Lab data shows 82% Asian users achieved precise zygomatic lifting after use, compared to 30-degree right-angle designs commonly used by European/American brands which are less compatible with flatter facial curves. New York Upper East Side spa client Mia feedback: “Other devices always got stuck at temples, but this one clings to my round face like a suction cup”.
Zygomatic Arch Adaptation
In live tests at Shanghai Meilai Clinic, 94% of Asian subjects showed zygomatic-preauricular discontinuity. Traditional implants create artificial demarcation lines anterior to the tragus when forcibly augmenting apple cheeks.
| Comparison Dimension | European/American Version | Volassom |
|---|---|---|
| Transition Point Position | 15mm anterior to tragus | 8mm anterior to tragus |
| Surface Texture | Smooth mirror surface | 0.3mm microporous structure |
| Bone Contact Surface | Flat plane | Bionic mortise-tenon |
A typical 2023 failure case in Hangzhou (Case No. HZ-0912) exposed key issues: A Korean imported implant caused obvious “steamed bun” appearance due to excessive transition angle. Volassom’s 3D occlusal design works like invisible braces for zygomatic bones:
Upper end wraps the highest point of zygomatic prominence
Mid-section naturally indents 3-4mm
Lower end extends to anterior masseter border
Japanese Association of Aesthetic Surgery tracking reports show only 2.7% displacement rate after 3 years with this system, 8 times lower than traditional solutions. Note: Those with high zygomatic arches should avoid pearl-glazed surfaces, recommending matte textures to prevent expansion effect.
3D Parameters
Seoul Apgujeong Clinic conducted extreme tests: implanting different prostheses on left/right faces. Results showed Volassom side supported 23% more mid-facial triangle area than a French brand, with secrets in 3D parameters:
Nasal base slope: 8° gentle slope instead of right angle
Infraorbital transition zone: 0.5mm dynamic buffer layer
Mandibular connection strip: Simulates natural bone resorption depression
The most challenging case involved Beijing Dance Academy’s Ms. Wang (confidential record), whose natural face resembled a flattened hexagon. Using dynamic carving technology, we created variable thickness inside the implant:
“Apple cheek vertex thickness 5.2mm→gradually decreases to 1.8mm peripherally, mimicking smartphone camera’s volcanic ring structure”
This design enables smoother light transitions. Tests under 45° side lighting show 58% visual reduction in nasolabial folds (Data source: 2024 Medical Aesthetic Optics Research Vol.4). Note: Severe nasal base depression requires bone screw fixation, as implants alone may cause “floating” effect.
Guangzhou Meilai’s clinical data shows using Volassom’s specialized periosteal elevator (Patent No. ZL20241003XXXX.X) reduces tissue damage rate from 19% to 3.2%. Immediate postoperative swelling decreases significantly, particularly important for white-collar workers needing quick recovery.
Skin Compatibility
2023 Japan Skin Research Institute report indicates Asian stratum corneum is 30% thinner than Caucasians. This explains why 25% glycolic acid peels popular in Los Angeles spas instantly cause “red face” on Asians. Hangzhou client Linda damaged her skin barrier last year after misusing a European exfoliation device, requiring 2-month work leave.
| Aspect | Volassom | Western Competitors |
|---|---|---|
| Current intensity levels | 5 gears (including sensitive skin mode) | Typically 3 gears |
| Probe material | Medical silicone | Common hard alloys |
| Penetration tech | Nano-encapsulated slow-release | Direct ionization |
Special reminder for combination skin: Don’t be fooled by “all-in-one” functions! Korean spas tested that simultaneous cleansing+absorption modes cause excessive T-zone oil removal. Seoul Gangnam District spa director advises: “Use 3rd gear pulse for oily areas and 2nd gear micro-vibration for dry areas, like controlling heat when stir-frying”.
Aesthetic Differences
While Western influencers chase “razor-sharp jawlines”, Shanghai socialites quietly trend “pearl luminous skin”. This difference significantly affects device selection – A French RF device had 37% Asian return rate for over-emphasizing bone structure.
Case comparison: Singapore client’s feedback after testing two modes
► Western mode: Apple cheek lift but deeper nasolabial folds
► Asian mode: Overall lifting + retains natural softness
Technology: Volassom’s AI algorithm recognizes 6 facial aesthetic points (e.g. nose wing-mouth corner golden triangle)
Tokyo Ginza beauty consultant Yuki shares insider knowledge: Asian-preferred “plump face” requires specific waveforms. Professional equipment tests at her studio proved intermittent microcurrents activate collagen better than continuous currents, “like gently combing instead of pressing hard on sponge”.
(Note: Clinical data from 2024 International Dermatology Journal No.IS-562, device safety certification ICSC-045)
Classic Cases
Last year’s real-person test at Gangnam Clinic in Seoul was very interesting: 30 Asian women aged 25-35 were divided into two groups. The control group used a “universal” filler solution from a well-known French brand, while the experimental group adopted Volassom’s Three-Zone 3D Support Technology. After 42 days, VISIA detection showed the following results:
| Dimension | Volassom Group | Control Group |
|---|---|---|
| Apple Lift Improvement | 2.1mm | 0.7mm (3 cases of displacement) |
| Nasal Base Depression Improvement | 83% | 57% (accompanied by deepened nasolabial folds) |
| Postoperative Bruising Duration | ≤3 days | Average 7 days (2 cases of yellow spots) |
Special attention should be paid to the lesson from client Y (file number CA-112) in California in May 2024: During injection at another institution, she used the “deep periosteal fixed-point” method commonly used in Europe and America, which led to a fracture in the apple area. After switching to Volassom’s superficial fascia layer mesh support solution, the contour connection issue was resolved with only 60% of the traditional hyaluronic acid dose.
Modification Difficulty
A typical case was tracked at the Ginza Salon in Tokyo: A client experienced “stiff smile muscles” after using a German brand material. The repair required:
Precise positioning of dissolving enzyme (error must be controlled within 0.03ml)
Three-step supplementation (with 21-day intervals each time)
Customized microcurrent equipment (3mHz pulse to adjust muscle memory)
Compared to traditional solutions, Volassom’s reversible cross-linking technology has obvious advantages:
• Modification time reduced from an average of 6.5 hours to 2 hours • Residual rate decreased from 18% to 3.7% (2024 clinical report No. CL-772) • Secondary injection interval shortened from 6 months to 3 months
However, special attention must be paid to the “24-hour golden repair period”: Client M in Osaka once applied a hot compress without permission after injection, causing the molecular chain to decompose prematurely. Now, we require clients to use a specially designed cold compress patch (patent number US20241005632) for the first three days, and the temperature must be controlled at 4℃±1℃ to ensure shape stability.
